Traction control light on and car shaking

Traction control light on and car shaking, The reasons behind cars shaking and the come-on of traction control lights, More Problems with Traction Control Light

The main culprit that can lead to cause the traction control light to come on and shake the car is a faulty wheel speed sensor. It can send the wrong signals to the ECU, in case of a defective sensor. As an outcome, the TCL comes on. The problems with the ABS system and worn-out tires, wrong tire sizes, behind-car shaking and traction control light issues are other culprits.

The reasons behind cars shaking and the come-on of traction control lights

There are the following reasons:

1-A Faulty Wheel Speed Sensor

The sensor of wheel speed is part of the system of traction control. They are responsible for detecting the rotation speed of each wheel and the sensors make a signal which ties in with the wheel speed. During different driving conditions to determine whether a wheel is locking up or not the ABS system uses the signals. If the driver requires instant braking, the brake system pressure is released immediately to prevent the vehicle from skidding.

As an outcome, it will decrease the distance of skidding and in turn, will reduce the risk of an accident. If there is a fault in the wheel speed sensor which resulted in the abs light and the traction light will come on and the abs may stop working. During instant braking, the front wheel locks up which leads to cause. There are some culprits which may participate in preventing the speed sensor from functioning such as Road debris, open or shorted wires, and brake dust. The metal stick to the magnetic wheel speed sensor or other foreign objects from the road hits due to this excessive rust and it can cause damage to the sensor.

During the replacement of suspension components, the wheel speed sensor can be easily damaged. For instance, during strut replacement, the wheel speed sensor can be faulty. It occurs due to the dropping motion of the strut when this becomes detached from the suspension.

Due to this, the wires of the sensor will cause to stretch and damage the wires. With the wheel speed sensor, the computer will lose communication.

Solution:

Remove each wheel and carefully check the sensor of the wheel speed. To inspect the sensor and for dirt and debris trigger wheel, don’t forget. To clean and wipe with a dry shop rag use water, If there is dust and dirt.

Next on the sensor check for rust or brake dirt accumulation. Under such a situation, you should need to remove the sensor and clean the dirt buildup.  After this, with the help of a scan tool turns off the ABS. We suggest you to replacing the damaged wheel speed sensor with the use of hiring a certified mechanic.

2-Wrong Size of Tires

The traction control light can come on,  installing the wrong size tires due apart from a faulty wheel speed sensor. The installation of incorrect tires will not deliver the traction properly the vehicle requires or it may slip away from their places.

The sensors of wheel speed, as a result, deliver intermittent signals to the ECO, their responsibility is to lock up the wheel and then turn the traction control light on.

Solution:

Make sure that the tires you have installed are the same size. Ensure that the sizes of all tires match the original tire size. For installing the tires professionally we suggest you bring your car to a mechanic.

3-Worn Out Tires

It is true the traction light to coming on, the worn tires cause this. Since one of the tires has its traction lost. The worn-out tire has the ability to spin faster as compared to others by 10 to 15%.

You know in ABS systems all the vehicles have sensors on each wheel. As a tire rotates faster as compared to others, the sensor of the wheel will take wrong the signals to the ECU, which can cause to cause the traction light to come on.

Solution:

With a worn-out tire, you should never drive a car. Under such a situation, you could face dangerous conditions. Whenever you note that one of the tires gets worn out, then you should need to replace it with the original size of the tire according to matches.

4-The issues with the ABS System

The principles working of the ABS system and the System of Traction Control are the same. The TCS light will come on if there is a problem with the ABS system. The TCS and stability control won’t work, in case of if the ABS control module is at fault. The ABS system can fail due to Moisture, corrosion, and other external factors.

Solution:

To determine whether there is a problem with the system of ABS or in the sensor of wheel speed this purpose utilizes an  OBD2 scanner tool before replacing the ABS control module. You need to replace the ABS control module in case of if it identifies a problem with the system of the ABS. We suggest you if you are not mechanically inclined, you leave this task for a professional. In another case to reduce the replacement cost you can do this.

5-The Faulty Spark Plugs

A faulty spark plug in some cases can cause the traction control light to come on. You will have to face this issue particularly if the spark plugs cause misfires. In case the if the spark plugs get worn out and or if you improperly install them then in rare cases they will misfire triggering the traction control light to come on.

Solution:

The spark plugs are intact and do not get damaged you should make sure of this. You should need to replace the spark plug if they wear out. You should need to check the sensor of the wheel speed and or the ABS control module. Maintaining proper traction on a slippery road surface, understand that your car working is well if the TCL is on. There is a problem with the sensor of the wheel speed or its wiring.

Traction control light on and car shaking

If Your Traction Control Light Comes On, what do you think about it? Is it bad?

If the traction control light comes on, then it brings both good and bad news. Maintaining proper traction on the surface of a slippery road, understanding the car is working well  If the TCL is on. There is a problem with the sensor of wheel speed or its wiring, the bad part is- the light of the traction control indicates.

You should need to inspect your vehicle to work out what causes that leads to the traction light to come on, to keep you on the safe side.

What causes the TCL to come on and how can we solve those issues we already mentioned what are causes of the TCL to come on. Alternatively, to inspect your car professionally you can take the car to a professional mechanic.

More Problems with Traction Control Light

You can face the following in light of traction issues.

The light of the traction control is on and the Car Won’t Start

If you encounter this issue, then we say that the module of the traction control is at fault. The module takes time to reset in case of if the vehicle won’t start or it shuts off.

Until the module detects the problem again it allows you to drive your vehicle. It will shut off your car in case once the traction control module identifies the issue. If the control module is at fault, then we suggested you take the car to a professional. In the case of having basic knowledge of cars even you will be unable to fix this issue.

The light of the traction control is on and  Car Won’t Accelerate

The acceleration is greatly affected by traction control. It will slow down your car, not quickly. The traction control system keeps helping your wheels on the ground and will help it go quicker some people mistakenly think. The traction control limits the power to the wheels and causes your car slows down. The traction control system keeps helping your wheels on the ground and will help it go quicker some people think. The traction control limits the power to the wheels and causes your car slows down.

Will the sensor of speed hurl a Code?

A very important function of a speed sensor is to monitor the wheel speed, in case the sensor fails to deliver accurate data then the PCM will alert the ECU. When the vehicle is examined with the scanner of an OBD-II. The sensor of the wheel speed displays an error code. In case of a faulty wheel speed sensor then the diagnostic assessment will slender it down.

How Much cost needed for the replacement of a Wheel Speed Sensor?

Almost the average cost for the replacement of the Wheel Speed Sensor is between $200 to $250, and it depends on the make and model. Almost one hour is required to replace the sensor, which can costly as $150, and the part of an OEM is normally around $100.  I know, for a wheel speed sensor, you did not expect to pay a very high price. Although, its location normally form things worse. Only one hour is required for an experienced mechanic to get the sensor off the car and install a new one.

By using an aftermarket sensor, you can save some money and its price is normally almost $50, but you have to keep in mind that the warranty of the car can end from this. To fix your car the cheapest way is by doing it yourself as usual.

If you have some knowledge and tools required then in case of replacement of a bad wheel speed sensor you would be looking at just under $100. For the times required to perform a car repair and a better understanding see our guide on how long a car service should take.

Is wheel speed sensor can cause the car to shake?

Yes. If it sends the wrong signals to the driver assist systems- the system of traction control, the system of Antilock braking, and the electronic stability system. A muddle in the system can affect the normal functioning of the car and the illumination of warning lights such as making it shake. The brakes might lock and cause the car to vibrate in case of a faulty wheel sensor.

Is the traction control can cause Your Car to Shake?

Yes, when driving the system of traction control can make your case shake. If the system of traction control received false readings such as from a bad sensor of wheel speed, then it will try to adjust the car to a false problem. The other system that can lead to cause the car to shake by receiving a false sensor of wheel speed is the ABS.

If the Traction Control Warning Is On and the Car Is Shaking Is It Safe to Drive the Car?

Technically it is possible but it is not ideal to do so. There can be a risk factor of a shaking car to your safety and other traffic participants. Although, it is easy to drive the car at low speeds to take the car to the local repair garage for its inspection. You should need a mobile technician so that he comes to your place and have the car fixed in case of if the shaking is really bad. If you do not find any mobile mechanic in your area, then you need a tow truck that takes your vehicle to a repair shop.

Final words

When your car shakes and the light of traction control is on then in such case you must immediately with the issue. During driving your car with this problem you may face dangerous situations.

So, to figure out the reason behind this problem and fix it, you should need to follow the troubleshooting steps we mentioned. If you fail to solve this issue of traction control, you need not hesitate to reach out to a professional mechanic.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top